Chapter 3
| Basic Management Tasks
Displaying Hardware/Software Versions
– 67 –
Figure 3: System Information
Displaying Hardware/Software Versions
Use the System > Switch page to display hardware/firmware version numbers for
the main board and management software, as well as the power status of the
system.
Parameters
The following parameters are displayed:
Main Board Information
◆ Serial Number – The serial number of the switch.
◆ Number of Ports – Number of built-in ports.
◆ Hardware Version – Hardware version of the main board.
◆ Internal Power Status – Displays the status of the internal power supply.
Management Software Information
◆ Role – Shows that this switch is operating as Master or Slave.
◆ EPLD Version – Version number of Erasable Programmable Logic Device.
◆ Loader Version – Version number of loader code.
◆ Diagnostics Code Version – Version of Power-On Self-Test (POST) and boot
code.
◆ Operation Code Version – Version number of runtime code.
To Next Page
Loading...
Need help?
General
