Edge-Core ECS4210-12P Web Management Guide

Chapter 7 | Spanning Tree Algorithm
Configuring Global Settings for STA
– 187 –
Web Interface
To configure global STA settings:
1. Click Spanning Tree, STA.
2. Select Configure Global from the Step list.
3. Select Configure from the Action list.
4. Modify any of the required attributes. Note that the parameters displayed for
the spanning tree types (STP, RSTP, MSTP) varies as described in the preceding
section.
5. Click Apply
Figure 107: Configuring Global Settings for STA (STP)

Edge-Core ECS4210-12P Specifications

General

Brand	Edge-Core
Model	ECS4210-12P
Category	Network Router
Language	English