Chapter 12
| Security Measures
AAA Authorization and Accounting
– 257 –
To show the RADIUS or TACACS+ server groups used for accounting and
authorization:
1. Click Security, AAA, Server.
2. Select Configure Group from the Step list.
3. Select Show from the Action list.
Figure 157: Showing AAA Server Groups
Configuring AAA
Accounting
Use the Security > AAA > Accounting page to enable accounting of requested
services for billing or security purposes, and also to display the configured
accounting methods, the methods applied to specific interfaces, and basic
accounting information recorded for user sessions.
Command Usage
AAA authentication through a RADIUS or TACACS+ server must be enabled before
accounting is enabled.
Parameters
These parameters are displayed:
Configure Global
â—† Periodic Update - Specifies the interval at which the local accounting service
updates information for all users on the system to the accounting server.
(Range: 0-2147483647 minutes; where 0 means disabled)
Configure Method
◆ Accounting Type – Specifies the service as:
â–
802.1X – Accounting for end users.
â–
Exec – Administrative accounting for local console, Telnet, or SSH
connections.
To Next Page
Loading...
Need help?
General
