Chapter 12
| Security Measures
AAA Authorization and Accounting
– 258 –
◆ Method Name – Specifies an accounting method for service requests. The
“default” methods are used for a requested service if no other methods have
been defined. (Range: 1-64 characters)
Note that the method name is only used to describe the accounting method
configured on the specified RADIUS or TACACS+ servers. No information is sent
to the servers about the method to use.
◆ Accounting Notice – Records user activity from log-in to log-off point.
◆ Server Group Name - Specifies the accounting server group. (Range: 1-64
characters)
The group names “radius” and “tacacs+” specifies all configured RADIUS and
TACACS+ hosts (see “Configuring Local/Remote Logon Authentication” on
page 251). Any other group name refers to a server group configured on the
Security > AAA > Server (Configure Group) page.
Configure Service
◆ Accounting Type – Specifies the service as 802.1X, Command or Exec as
described in the preceding section.
■
802.1X
■
Method Name – Specifies a user defined accounting method to apply
to an interface. This method must be defined in the Configure Method
page. (Range: 1-255 characters)
■
Exec
■
Console Method Name – Specifies a user defined method name to
apply to console connections.
■
Method Name – Specifies a user defined method name to apply to
Telnet connections.
Show Information – Summary
◆ Accounting Type - Displays the accounting service.
◆ Method Name - Displays the user-defined or default accounting method.
◆ Server Group Name - Displays the accounting server group.
◆ Interface - Displays the port, console or Telnet interface to which these rules
apply. (This field is null if the accounting method and associated server group
has not been assigned to an interface.)
Show Information – Statistics
◆ User Name - Displays a registered user name.
To Next Page
Loading...
Need help?
General
