Edge-Core ECS4210-12P - Figure 314: Assigning an Interface to a Multicast Service; Figure 315: Showing Static Interfaces Assigned to a Multicast Service

Chapter 16 | Multicast Filtering
Layer 2 IGMP (Snooping and Query)
– 477 –
3. Select the VLAN that will propagate the multicast service, specify the interface
attached to a multicast service (through an IGMP-enabled switch or multicast
router), and enter the multicast IP address.
4. Click Apply.
Figure 314: Assigning an Interface to a Multicast Service
To show the static interfaces assigned to a multicast service:
1. Click Multicast, IGMP Snooping, IGMP Member.
2. Select Show Static Member from the Action list.
3. Select the VLAN for which to display this information.
Figure 315: Showing Static Interfaces Assigned to a Multicast Service