Chapter 1
| Introduction
Description of Software Features
– 34 –
Description of Software Features
The switch provides a wide range of advanced performance enhancing features.
Flow control eliminates the loss of packets due to bottlenecks caused by port
saturation. Storm suppression prevents broadcast, multicast, and unknown unicast
traffic storms from engulfing the network. Untagged (port-based), tagged, and
protocol-based VLANs, plus support for automatic GVRP VLAN registration provide
traffic security and efficient use of network bandwidth. CoS priority queueing
ensures the minimum delay for moving real-time multimedia data across the
network. While multicast filtering provides support for real-time network
applications.
Some of the management features are briefly described below.
CONFIGURATION
BACKUP AND RESTORE
You can save the current configuration settings to a file on the management station
(using the web interface) or an FTP/TFTP server (using the web or console
interface), and later download this file to restore the switch configuration settings.
AUTHENTICATION This switch authenticates management access via the console port, Telnet, or a web
browser. User names and passwords can be configured locally or can be verified via
a remote authentication server (i.e., RADIUS or TACACS+). Port-based
authentication is also supported via the IEEE 802.1X protocol. This protocol uses
Extensible Authentication Protocol over LANs (EAPOL) to request user credentials
from the 802.1X client, and then uses the EAP between the switch and the
IP Version 4 and 6 Supports IPv4 and IPv6 addressing, and management
IEEE 802.1D Bridge Supports dynamic data switching and addresses learning
Store-and-Forward
Switching
Supported to ensure wire-speed switching while eliminating bad
frames
Spanning Tree Algorithm Supports standard STP, Rapid Spanning Tree Protocol (RSTP), and
Multiple Spanning Trees (MSTP)
Virtual LANs Up to 256 using IEEE 802.1Q, port-based, protocol-based, voice VLANs,
and QinQ tunnel
Traffic Prioritization Default port priority, traffic class map, queue scheduling, IP Precedence,
or Differentiated Services Code Point (DSCP)
Qualify of Service Supports Differentiated Services (DiffServ)
Link Layer Discovery
Protocol
Used to discover basic information about neighboring devices
Multicast Filtering Supports IGMP snooping and query for Layer 2, MLD snooping and
query for Layer 3, and Multicast VLAN Registration
Switch Clustering Supports up to 36 member switches in a cluster
Table 1: Key Features (Continued)
Feature Description
To Next Page
Loading...
Need help?
General
