EasyManuals Logo

Edge-Core ECS4210-12P Web Management Guide

Edge-Core ECS4210-12P
550 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #305 background imageLoading...
Page #305 background image
Chapter 12
| Security Measures
Access Control Lists
– 305
Eth2 – Ethernet II packets.
LLC-other – LLC and other packets.
SNAP – SNAP packets.
VID – VLAN ID. (Range: 1-4094)
VID Bit Mask – VLAN bit mask. (Range: 0-4095)
Ethernet Type – This option can only be used to filter Ethernet II formatted
packets. (Range: 600-ffff hex.)
A detailed listing of Ethernet protocol types can be found in RFC 1060. A few of
the more common types include 0800 (IP), 0806 (ARP), 8137 (IPX).
Ethernet Type Bit Mask – Protocol bit mask. (Range: 600-ffff hex.)
Time Range – Name of a time range.
Web Interface
To add rules to a MAC ACL:
1. Click Security, ACL.
2. Select Configure ACL from the Step list.
3. Select Add Rule from the Action list.
4. Select MAC from the Type list.
5. Select the name of an ACL from the Name list.
6. Specify the action (i.e., Permit or Deny).
7. Select the address type (Any, Host, or MAC).
8. If you select “Host,” enter a specific address (e.g., 11-22-33-44-55-66). If you
select “MAC,” enter a base address and a hexadecimal bit mask for an address
range.
9. Set any other required criteria, such as VID, Ethernet type, or packet format.
10. Click Apply.

Table of Contents

Other manuals for Edge-Core ECS4210-12P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Edge-Core ECS4210-12P and is the answer not in the manual?

Edge-Core ECS4210-12P Specifications

General IconGeneral
BrandEdge-Core
ModelECS4210-12P
CategoryNetwork Router
LanguageEnglish

Related product manuals