Configuring Link Aggregation
11-10 Configuring Link Aggregation
Table 11-4 describes how to manage link aggregation.
4. Optionally, change the administratively assigned
key for each aggregation on the device.
set lacp aadminkey port-string value
5. Optionally, enable single port LAGs on the
device.
set lacp singleportlag {enable | disable}
6. Optionally, modify the LAG port parameters. See
Table 11-2 on page 11-7 for a description of port
parameters.
If necessary, enable LACP on the port. See
Table 11-3 on page 11-9 for the default LACP
port active state for your platform.
set port lacp port port-string
{
[aadminkey aadminkey] [aportpri aportpri]
[padminsyspri padminsyspri] [padminsysid
padminsysid] [padminkey padminkey]
[padminportpri padminportpri] [padminport
padminport]
[aadminstate {lacpactive | lacptimeout |
lacpagg | lacpsync | lacpcollect | lacpdist |
lacpdef | lacpexpire}]
[padminstate {lacpactive | lacptimeout |
lacpagg | lacpsync | lacpcollect | lacpdist |
lacpdef | lacpexpire}]
[enable | [disable]
}
7. Optionally, assign static ports to a LAG when the
partner device only supports a non-LACP
method of aggregation.
set lacp static lagportstring [key] port-string
Table 11-4 Managing Link Aggregation
Task Command
Reset LACP system priority or admin
key settings to the default values.
clear lacp {[asyspri] [aadminkey port-string]}
Remove specific static ports from an
aggregation.
clear lacp static lagportstring port-string
Reset the single port LAG feature to
the default value of disabled.
clear lacp singleportlag
Reset a link aggregation port setting to
the default value for one or more ports.
See Table 11-2 on page 11-7 for a
description of port parameters.
clear port lacp port port-string
{
[aadminkey] [aportpri] [padminsyspri] [padminsysid]
[padminkey] [padminportpri] [padminport]
[aadminstate {lacpactive | lacptimeout | lacpagg | lacpsync |
lacpcollect | lacpdist | lacpdef | lacpexpire | all}]
[padminstate {lacpactive | lacptimeout | lacpagg | lacpsync |
lacpcollect | lacpdist | lacpdef | lacpexpire | all}]
}
Procedure 11-1 Configuring Link Aggregation (continued)
Step Task Command(s)
To Next Page
Loading...
Need help?
General