Enterasys C5G124-24 User Manual

Configuring PIM-SM
19-24 Configuring Multicast
R1(su)->router(Config)#interface vlan 3
R1(su)->router(Config-if(Vlan 3))#ip address 172.1.2.1 255.255.255.0
R1(su)->router(Config-if(Vlan 3))#ip igmp enable
R1(su)->router(Config-if(Vlan 3))#ip ospf enable
R1(su)->router(Config-if(Vlan 3))#ip pimsm enable
R1(su)->router(Config-if(Vlan 3))#no shutdown
R1(su)->router(Config-if(Vlan 3))#exit
R1(su)->router(Config)#interface vlan 4
R1(su)->router(Config-if(Vlan 4))#ip address 172.1.3.1 255.255.255.0
R1(su)->router(Config-if(Vlan 4))#ip igmp enable
R1(su)->router(Config-if(Vlan 4))#ip ospf enable
R1(su)->router(Config-if(Vlan 4))#ip pimsm enable
R1(su)->router(Config-if(Vlan 4))#no shutdown
R1(su)->router(Config-if(Vlan 4))#exit
R1(su)->router(Config)#router id 1.1.1.1
R1(su)->router(Config)#router ospf 1
PIM-SM Display Commands
Table 19-10 lists the PIM show commands for stackable C3 and C5 devices and standalone G-
Series devices.
Table 19-10 PIM-SM Show Commands
Task Command
Display system-wide PIM-SM routing information. show ip pimsm
Display the table containing objects specific to a PIM
domain.
show ip pimsm componenttable
Display PIM-SM status of the router interfaces. With
the stats parameter, this command displays
statistical information for PIM-SM on the specified
interface.
show ip pimsm interface {vlan vlan-id | stats {vlan-
id | all}}
Display the router’s PIM neighbors. show ip pimsm neighbor [vlan-id]
Display the PIM information for candidate RPs for all
IP multicast groups or for a specific group address.
show ip pimsm rp {group-address group-mask | all
| candidate}
Display the RP that will be selected from the set of
active RP routers.
show ip pimsm rphash group-address
Display the PIM-SM static RP information. show ip pimsm staticrp
Display the IP multicast routing table. show ip mroute [unicast-source-address |
multicast-group-address] [summary]

Enterasys C5G124-24 Specifications

General

Brand	Enterasys
Model	C5G124-24
Category	Switch
Language	English