Using the Equipment
G703 Input
• G.703 Input – This button gives access to a further web page, described in the
following section.
3.10.6.7 Input > G.703 Input
Any changes which are made to the Input page may be confirmed by selecting the
Apply Changes button. Selecting the Refresh button will ensure that the latest
information is being displayed from the current values of the equipment.
To view this web page, select the G.703 button from the previous web page.
Figure 3.56 Input > G.703 Input Web Page
G.703 Input Parameters
• PDH Rate – displays the detected PDH rate of the incoming G.703 stream. This
can have the following values:
- NONE
- E3 (34 Mbps).
- DS3 (45 Mbps).
• Framing – current framing mode detected for the G.703 Card.
- NONE
- M13
- C-BIT
To Next Page
Loading...