Ericsson RX8000 - Page 158

Using the Equipment
3-118
EN/LZT 790 0005 R7A
- 16K
- 16Ke
- 32Ke
Note: ‘e’ refers to the Extended Carrier Mode.
• Guard Interval – This is as T2 but can have values:
- 1/32
- 1/16
- 1/8
- 1/4
- 1/128
- 19/128
- 19/256
• Pilot pattern – This is the detected pattern for the pilot pulses, these pulses aid
in the demodulator when tuning, this can have the values:
- PP1
- PP2
- PP3
- PP4
- PP5
- PP6
- PP7
- PP8
• PAPR indicator – This can have the values:
- None
- ACE used
- TR used
- TR and ACE used
• SISO/MISO – This can have the values:
- SISO
- MISO
- NON DVB-T2