Using the Equipment
CA page > CA Service
Status > Status
Status page > CA Status Description
SERVICE CLEAR SERVICE CLEAR Service components for the selected service
are not scrambled.
SERVICE AUTHORIZED SERVICE AUTHORIZED The receiver is authorized for descrambling
the selected service. Descrambling is
successfully being applied.
CAM PRESENT
(ATTEMPTING
DECRYPTION SELECTED
PIDS ONLY)
SERVICE AUTHORIZED
(SELECTED PIDS ONLY)
The CA Module (DVB-CI) is detected and
configured for descrambling selected service
component PIDs only.
CAM PRESENT
(ATTEMPTING
DECRYPTION)
CAM PRESENT
(ATTEMPTING
DECRYPTION)
The CA Module (DVB-CI) is detected and
configured for descrambling. No errors are
detected.
SERVICE NOT
AUTHORIZED
CONDITIONAL ACCESS
ERROR
The receiver is not authorized for
descrambling the selected service.
CAM PRESENT NOT
DECRYPTING (MAX
COMPONENTS/SERV)
CONDITIONAL ACCESS
ERROR
The CA Module (DVB-CI) is detected
however the number of service components
selected for descrambling exceed that
configured for each service for the CA
Module.
CAM PRESENT NOT
DECRYPTING (PID FULL)
CONDITIONAL ACCESS
ERROR
The CA Module (DVB-CI) is detected
however the number of service components
selected for descrambling exceed that
configured for the CA Module.
CAM PRESENT NOT
DECRYPTING (SERVICE
FULL)
CONDITIONAL ACCESS
ERROR
The CA Module (DVB-CI) is detected
however the number of services selected for
descrambling exceed that configured for the
CA Module.
CAM PRESENT (NOT
DECRYPTING)
CONDITIONAL ACCESS
ERROR
The CA Module (DVB-CI) is detected
however the service has not been set up for
descrambling.
VALID CAM NOT
PRESENT
CONDITIONAL ACCESS
ERROR
The CA Module (DVB-CI) has not been
detected by the IRD.
SERVICE NO PMT CONDITIONAL ACCESS
ERROR
The service has been configured for
descrambling but its associated PMT has not
been detected in the Transport Stream.
SERVICE NO ECM CONDITIONAL ACCESS
ERROR
The service has been configured for
descrambling but its associated ECM has not
been detected in the Transport Stream.
SERVICE INVALID CONDITIONAL ACCESS
ERROR
Generic error message to cover all other
conditions.
Note: Not all of CA Status messages are appropriate for all CA systems.
To Next Page
Loading...