Using the Equipment
- Invalid Smartcard.
- Smartcard Comms Failure.
- Invalid Image.
- Invalid Image in Flash.
- Number of Elementary Stream > 8.
- Invalid PID Configuration.
- Processor Overload.
- NDS Card Not Accessible.
• SW Version – Describes the software version of the NDS CA Card.
• SW Build Time – Describes the software build time of the NDS CA Card.
• FW Version – Describes the firmware version of the NDS CA Card.
• CA Verifier Status – Displays the status provided by the Verifier NDS
proprietary code block, this can have the values:
- OK.
- Insert Card.
- Invalid Card.
- Service Blocked.
- Invalid Packet.
- Not Authorized.
- Hardware Failure.
- Blacked Out.
- Invalid Card.
- Invalid Pairing.
• NDS Pairing Key – This is the unique pairing identification number of the
S15441 card. It is a 16 digit number that is used to address the unit when any
entitlements are changed. When entitlements are changed, this is carried out
over air using uniquely addressed “Entitlement Messages”. For the unit to
receive these messages it recommended that it is left powered up and tuned to
the correct BSkyB service.
Note: The NDS Pairing key must be supplied to BSkyB so that the unit may be
paired. When contacting BSkyB for pairing issues please supply this
number.
To Next Page
Loading...
