Ericsson RX8000 - Page 304

Using the Equipment
3-264
EN/LZT 790 0005 R7A
Table 3.32 Example of How 16 Channels can be Accumulated Using Dual Multi-Channel (5.1) Mode
Audio Decoder
Max Output
Channels by
Decoder
Output
Channel
Names
Example Decoder
Setup
Output
Channels
Accumulated
Audio 1 6 (Lf Rf)
(C LFE)
(Lr Rr)
PID 101 - AAC 5.1
6 channel output
6
Audio 2 6 (Lf Rf)
(C LFE)
(Lr Rr)
PID 102 - AAC 5.1
6 channel output
12
Audio 3 2 L R (Stereo) PID 103 - AAC 5.1
Down-mixed to 2 channel
output
14
Audio 4 2 L R (Stereo) PID 104 - AAC 2.0
2 channel output
16
The following tables show the available output channels on RX82xx with the 4AUD
license enabled and those not available with the 4AUD license disabled or on the
RX83xx.
Table 3.33 Output Channels Available on RX82xx
RX82xx Disable 4AUD license Enable 4AUD license
Audio Decoder 1 2 1 2 3 4
Physical
decoder
Advanced Advanced Advanced Advanced Basic Basic
Output
Channels
N/A N/A 6 6 2 2
Channel Name N/A N/A (Lf Rf)
(C LFE)
(Lr Rr)
(Lf Rf)
(C LFE)
(Lr Rr)
L R (Stereo) L R (Stereo)
Table 3.34 Output Channels Available on RX83xx
RX83xx Disable 4AUD license Enable 4AUD license
Audio Decoder 1 2 N/A
Physical decoder Basic Basic
Output Channels N/A N/A
Channel Name N/A N/A
Under the Decode > Audio Output Routing section, the user is presented with the
following options for both the analogue outputs and the SDI embedded outputs: