Using the Equipment
3.19.4.4 License Keys
Marketing Code Description FAZ Number License Key Name
RX8200/SWO/SING/SERVFILT Single service
filtering
FAZ 101 0113/53 RX8XXX/SWO/SING/SERVFILT
RX83XX/SWO/SING/SERVFILT Single service
filtering
FAZ 101 0108/15 RX8XXX/SWO/SING/SERVFILT
3.19.4.5 Functional Description
In Remap mode the RX8000 can remap any video, audio or data components from
a filtered service to different PID values. The RX8000 is not capable of remapping
the SI table PID values for services.
The Remap mode requires the Single Service Filter license to be enabled. However,
Remap of one service is possible when filtering a single service or multiple services.
This is the second routing stage for the transport stream being processed by the
RX8000. At this stage, services may have already been descrambled from the
Service plus page.
The transport stream after this stage will be routed to the ASI output as a single
stream. The transport stream is also be routed IP Output module as a single stream
or manipulated by the Service Splitting feature.
3.19.4.6 Configuration
From the Output > Filter page of the web browser interface, the Service Filter
Mode must be set to Remap.
3.19.4.6.1 Service Selection
Figure 3.173 Services Web Page Showing PID Remapping Menu
To Next Page
Loading...