●
Check r
egistration line every row: This option enables you to choose which registration lines are
scanned by the printer, if you select 1 (the default), the printer stops printing and checks every
registration line, if you select a higher number, for example 2, the printer only scans every second
registration line. This increases the speed of the job, but also slightly increases the chances of
misregistration.
NOTE: This o
ption is enabled when the second image is selected (from Side B).
4. From the Image list section, you can rotate the selected image 180°.
5. Press the Save button to store the current image composition or the Cancel button to discard the
changes and return to the main job properties dialog.
The following screen is displayed where the double-sided job properties can be dened:
6. From the drop-down menu, select the side with the properties you want to dene or view.
NOTE: The side selected here is the side that will be printed. To print side B, select B.
102 Chapter 4 Create and manage print jobs ENWW
To Next Page
Loading...
