Juniper QFX5110 Series User Manual

RELATED DOCUMENTATION
Clearance Requirements for Airflow and Hardware Maintenance for a QFX3600 or QFX3600-I
Device | 123
Rack Requirements for a QFX3600 or QFX3600-I Device | 112
Mounting a QFX3600 or QFX3600-I Device on Four Posts in a Rack or Cabinet | 303
Mounting a QFX3600 or QFX3600-I Device on Two Posts in a Rack or Cabinet | 301
Cabinet Requirements for a QFX3500 Device
You can mount the QFX3500 device in a cabinet that contains a four-post 19-in. rack as defined in Cabinets,
Racks, Panels, and Associated Equipment (document number EIA-310-D) published by the Electronics Industry
Association.
Cabinet requirements consist of:
•
Cabinet size and clearance
•
Cabinet airflow requirements
Table 29 on page 119 provides the cabinet requirements and specifications for the QFX3500 device.
Table 29: Cabinet Requirements for the QFX3500 Device
Guidelines
Cabinet
Requirement
The minimum cabinet size for accommodating a QFX3500 device is 36 in. (91.4 cm) deep.
Large cabinets improve airflow and reduce the chance of overheating.
Cabinet size and
clearance
119

Juniper QFX5110 Series Specifications

General

Rack Units	1U
Operating System	Junos OS
Form Factor	Fixed
Management	CLI, SNMP, NETCONF
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Humidity	5% to 90% non-condensing
AC Power Input	100-240 VAC
Power Supply	Redundant, hot-swappable