Juniper QFX5110 Series User Manual

Table 63: AC Power Cord Specifications for 1100 W AC Power Supplies for EX4300 Switches and 1400 W
AC Power Supplies for EX4300-48MP and EX4300-48MP-S Switches (continued)
Juniper Model NumberPlug StandardsElectrical SpecificationsCountry/Region
CBL-PWR-C15M-HITEMP-USNEMA 5-15 Type N5/15125 VAC, 15 A, 60 HzNorth America
CBL-PWR-C15M-HITEMP-SZSEV 1011 / 6534-2 Type 12G250 VAC, 10 A, 50 HzSwitzerland
CBL-PWR-C15M-HITEMP-UKBS 1363/A Type BS89/13250 VAC, 10 A, 50 HzUnited Kingdom
CAUTION: The AC power cord for the EX4300 switch is intended for use with this
switch only. Do not use the cord with any other product.
CAUTION: Power cords must not block access to switch components.
RELATED DOCUMENTATION
Connecting AC Power to an EX4300 Switch
DC Power Supply in EX4300 Switches
IN THIS SECTION
Characteristics of a DC Power Supply | 185
DC Power Supply Airflow | 186
N+0 Redundancy Configuration of DC Power Supplies | 187
N+N Redundancy Configuration of DC Power Supplies | 188
The DC power supply in EX4300 switches is a hot-insertable and hot-removable field-replaceable unit
(FRU): You can install it without powering off the switch or disrupting the switching function.
184

Juniper QFX5110 Series Specifications

General

Rack Units	1U
Operating System	Junos OS
Form Factor	Fixed
Management	CLI, SNMP, NETCONF
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Humidity	5% to 90% non-condensing
AC Power Input	100-240 VAC
Power Supply	Redundant, hot-swappable