•
MC-LAG, which provides dual-homing with reduced complexity related to STP
•
Junos Fusion Datacenter, where QFX5110 can operate as a satellite leaf node for 1 Gigabit, 10
Gigabit, 40 Gigabit, or 100 Gigabit connectivity
Overlay options—QFX5110 provides L2 and L3 VXLAN gateway support that works in conjunction with
a robust EVPN control plane to efficiently manage your virtualized workloads. Another option,
OVSDB-VXLAN can be introduced to stitch virtualized and physical workloads.
High density and low latency applications—Powered with high density 10 Gigabit or 40 Gigabit network
ports and four 100G uplinks, the QFX5110 delivers 1.76 Tbps of throughput and a low latency of 550
nS. Your legacy applications continue to be supported by 100 Mbps or 1 Gigabit copper SFP
transceivers.
QFX5110 Models Overview
The QFX5110 line of switches offers two compact 1 U models that are ideal for top-of-rack, QFX Virtual
Chassis, or Virtual Chassis Fabric (VCF) deployments, the 48-port QFX5110-48S and the 32-port
QFX5110-32Q. Performance of the control plane running on all the QFX5110 switches is enhanced by
the 1.8-Ghz quad-core Intel CPU with 16 GB of memory and 64 GB of solid-state drive (SSD) storage.
Both models offer flexible port configurations of 1-Gigabit Ethernet, 10-Gigabit Ethernet, 40-Gigabit
Ethernet, and 100-Gigabit Ethernet.
Both models can be ordered with either ports-to-FRUs or FRUs-to-ports airflow and with AC or DC power
supplies.
The QFX5110-32Q can be used as:
•
A standalone switch (Junos OS Release 17.2R1 and later).
•
A primary, backup, or line card in a QFX5110 Virtual Chassis (Junos OS Release 17.3R1 and later).
A QFX5110 Series Virtual Chassis allows you to connect up to 10 QFX5110 or supported QFX5100
switches into one logical device and manage the device as a single chassis using a ring topology. The
following QFX5100 switches are supported in a QFX5110 Virtual Chassis:
•
QFX5100-24Q
•
QFX5100-48S
•
QFX5100-96S
For a QFX5100 switch to participate in a QFX5110 Virtual Chassis, the switch must have the same
software version and image installed as the software running on the QFX5110 switches in the Virtual
Chassis. You do not need to configure mixed mode. In a QFX5110 Virtual Chassis, we recommend to
use QFX5110 switches in the primary and backup Routing Engine roles, and QFX5100 switches only in
the linecard role.
11
To Next Page
Loading...
Need help?
General
