Juniper QFX5110 Series User Manual

For information about the show chassis hardware command, see show chassis hardware.
Locating the Chassis Serial Number ID Label on an EX4300 Switch
The serial number ID label is located on the rear panel of the chassis on EX4300 switches.
Figure 227 on page 600 shows the location of the serial number ID label on 24-port and 48-port EX4300
switches except EX4300-48MP and EX4300-48MP-S switches. Figure 228 on page 600 shows the location
of the serial number ID label on EX4300-48MP and EX4300-48MP-S switches. Figure 229 on page 600
shows the location of the serial number ID label on 32-port EX4300 switches.
Figure 227: Location of the Serial Number ID Label on 24-Port and 48-Port EX4300 Switches Except
EX4300-48MP and EX4300-48MP-S Switches
Figure 228: Location of the Serial Number ID Label on EX4300-48MP and EX4300-48MP-S Switches
g022457
Serial number
ID label
Figure 229: Location of the Serial Number ID Label on 32-Port EX4300 Switches
600

Juniper QFX5110 Series Specifications

General

Rack Units	1U
Operating System	Junos OS
Form Factor	Fixed
Management	CLI, SNMP, NETCONF
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Humidity	5% to 90% non-condensing
AC Power Input	100-240 VAC
Power Supply	Redundant, hot-swappable