•
Before installing a QFX5100 switch, read the guidelines in “Site Preparation Checklist for a QFX5100
Device” on page 92 to verify that the intended site meets the specified power, environmental, and
clearance requirements.
•
Before lifting or moving the QFX5100 switch, disconnect all external cables.
•
As when lifting any heavy object, lift most of the weight with your legs rather than your back. Keep your
knees bent and your back relatively straight and avoid twisting your body as you lift. Balance the load
evenly and be sure that your footing is solid.
RELATED DOCUMENTATION
General Safety Guidelines and Warnings | 203
Installation Instructions Warning | 218
Mount a QFX5100 Device in a Rack or Cabinet | 279
Chassis Lifting Guidelines for a QFX3600 or QFX3600-I Device
The weight of a fully loaded QFX3600 or QFX3600-I device chassis is approximately 20.5 lb (9.3 kg).
Observe the following guidelines for lifting and moving a QFX3600 or QFX3600-I device:
•
Before installing a QFX3600 or QFX3600-I device, read the guidelines in “Site Preparation Checklist for
a QFX3600 or QFX3600-I Device” on page 93 to verify that the intended site meets the specified power,
environmental, and clearance requirements.
•
Before lifting or moving the QFX3600 or QFX3600-I device, disconnect all external cables.
•
As when lifting any heavy object, lift most of the weight with your legs rather than your back. Keep your
knees bent and your back relatively straight and avoid twisting your body as you lift. Balance the load
evenly and be sure that your footing is solid.
RELATED DOCUMENTATION
General Safety Guidelines and Warnings | 203
Installation Instructions Warning | 218
Mounting a QFX3600 or QFX3600-I Device on Four Posts in a Rack or Cabinet | 303
Mounting a QFX3600 or QFX3600-I Device on Two Posts in a Rack or Cabinet | 301
219
To Next Page
Loading...
Need help?
General
