Juniper QFX5110 Series User Manual

Table 100: Fan Tray LED in a QFX3500 Device
DescriptionStateColorName
The fan tray is operating normally.On steadilyGreenFan
An error has been detected in the fan tray. Replace the fan tray
as soon as possible. To maintain proper airflow through the
chassis, leave the fan tray installed in the chassis until you are
ready to replace it.
BlinkingAmber
RELATED DOCUMENTATION
Cooling System and Airflow for a QFX3500 Device
Installing a Fan Tray in a QFX3500 Device | 457
Removing a Fan Tray from a QFX3500 Device | 459
AC Power Supply LEDs on a QFX3500, QFX3600, or QFX3600-I Device
Figure 195 on page 524 shows the location of the LEDs on the power supply.
Figure 202: AC Power Supply LEDs on a QFX3500, QFX3600, or QFX3600-I Device
g050008
AC OK
DC OK
Fault
Table 94 on page 524 describes the LEDs on the AC power supplies.
533

Juniper QFX5110 Series Specifications

General

Rack Units	1U
Operating System	Junos OS
Form Factor	Fixed
Management	CLI, SNMP, NETCONF
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Humidity	5% to 90% non-condensing
AC Power Input	100-240 VAC
Power Supply	Redundant, hot-swappable