Locating the Serial Number on a QFX3500 Device or Component
IN THIS SECTION
Listing the Chassis and Component Details Using the CLI | 596
Locating the Chassis Serial Number ID Label on a QFX3500 Device | 597
Locating the Serial Number ID Labels on FRU Components | 597
If you are returning a device or component to Juniper Networks for repair or replacement, you must locate
the serial number of the device or component. You must provide the serial number to the Juniper Networks
Technical Assistance Center (JTAC) when you contact them to obtain a Return Materials Authorization
(RMA). See “Contacting Customer Support to Obtain a Return Materials Authorization for a QFX Series
Device or Component” on page 619.
If the device is operational and you can access the command-line interface (CLI), you can list serial numbers
for the device and for some components with a CLI command. If you do not have access to the CLI or if
the serial number for the component does not appear in the command output, you can locate the serial
number ID label on the device or component.
NOTE: If you want to find the serial number ID label on a component, you need to remove the
component from the device chassis, for which you must have the required parts and tools
available.
Listing the Chassis and Component Details Using the CLI
To list the QFX3500 device and components and their serial numbers, use the show chassis hardware CLI
operational mode command. If you are using the QFX3500 device as a Node device in a QFabric system,
you must first log in to the device using the request component login CLI operational mode command.
user@device> show chassis hardware
Hardware inventory:
Item Version Part number Serial number Description
Chassis JN000TEST5 QFX3500
Routing Engine 0 BUILTIN BUILTIN QFX Routing Engine
FPC 0 REV 05 750-036931 EE0823 QFX 48x10G 4x40G Switch
596
To Next Page
Loading...
Need help?
General
