•
If you are returning the chassis, an appropriate screwdriver for the mounting screws used on your rack
or cabinet.
Packing a QFX3600 or QFX3600-I Device for Shipping
To pack a QFX3600 or QFX3600-I device for shipping:
1. Power down the device and remove the power cables. See “Powering Off a QFX3600 Device” on
page 412.
2. Remove the cables that connect the QFX3600 or QFX3600-I device to all external devices.
3. Remove all field-replaceable units (FRUs) from the device.
4. Have one person support the weight of the device while another person unscrews and removes the
mounting screws.
5. Remove the device from the rack or cabinet (see “Chassis Lifting Guidelines for a QFX3600 or QFX3600-I
Device” on page 219) and place the device in an antistatic bag.
6. Place the device in the shipping carton.
7. Place the packing foam on top of and around the device.
8. If you are returning accessories or FRUs with the device, pack them as instructed in “Packing QFX3600
or QFX3600-I Device Components for Shipping” on page 610.
9. Replace the accessory box on top of the packing foam.
10. Close the top of the cardboard shipping box and seal it with packing tape.
11. Write the RMA number on the exterior of the box to ensure proper tracking.
Packing QFX3600 or QFX3600-I Device Components for Shipping
CAUTION: Do not stack device components. Return individual components in separate
boxes if they do not fit together on one level in the shipping box.
To pack and ship QFX3600 or QFX3600-I device components:
610
To Next Page
Loading...
Need help?
General
