Juniper QFX5110 Series User Manual

Table 41: AC Power Cord Specifications (continued)
Graphic
Spare Juniper Model
Number
Shipped Juniper
Model Number
Plug
Standards
Electrical
SpecificationsCountry/Region
250 VAC, 10 A,
50 Hz
DC Power Specifications for a QFX5100 Device
Table 42 on page 156 describes the DC power specifications for DC product SKUs of the QFX5100 device.
Table 42: DC Power Specifications for a QFX5100 Device
SpecificationsProduct SKUsItem
•
Rated operating voltage: –48 VDC to -60
VDC
•
Operating voltage range: -40 VDC through
–72 VDC
QFX5100-24Q
QFX5100-48S
QFX5100-48T
DC input voltage
•
Rated operating voltage: VDC -48 VDC to
-60 VDC
•
Operating voltage range: –40 VDC through
-72 VDC
QFX5100-96S
10 A maximumQFX5100-24Q
QFX5100-48S
QFX5100-48T
QFX5100-96S
DC input current
rating
300 WQFX5100-48S
QFX5100-48T
QFX5100-24Q
Typical power
consumption
315 WQFX5100-96S
156

Juniper QFX5110 Series Specifications

General

Rack Units	1U
Operating System	Junos OS
Form Factor	Fixed
Management	CLI, SNMP, NETCONF
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Humidity	5% to 90% non-condensing
AC Power Input	100-240 VAC
Power Supply	Redundant, hot-swappable