Juniper QFX5110 Series User Manual

Table 40: AC Power Specifications for a QFX5100 Device (continued)
Item
365 WQFX5100-48S and QFX5100-48SH
395 WQFX5100-48T and QFX5100-48TH
470 WQFX5100-96S
RELATED DOCUMENTATION
AC Power Cord Specifications for a QFX Series Device | 154
AC Power Supply for a QFX5100 Device
General Safety Guidelines and Warnings | 203
General Electrical Safety Guidelines and Warnings | 240
AC Power Cord Specifications for a QFX Series Device
Detachable AC power cords are shipped with the chassis, if you include them as part of your order. The
coupler is type C13 as described by International Electrotechnical Commission (IEC) standard 60320. The
plug end of the power cord fits into the power source outlet that is standard for your geographical location.
NOTE: In North America, AC power cords must not exceed 14.75 feet (approximately 4.5 meters)
in length, to comply with National Electrical Code (NEC) Sections 400-8 (NFPA 75, 5-2.2) and
210-52, and Canadian Electrical Code (CEC) Section 4-010(3). The cords that can be ordered
for the QFX Series switches are in compliance.
Table 41 on page 155 lists AC power cord specifications provided for each country or region.
154

Juniper QFX5110 Series Specifications

General

Rack Units	1U
Operating System	Junos OS
Form Factor	Fixed
Management	CLI, SNMP, NETCONF
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Humidity	5% to 90% non-condensing
AC Power Input	100-240 VAC
Power Supply	Redundant, hot-swappable