Juniper QFX5110 Series User Manual

Figure 224: Location of the Serial Number ID Label on a QFX5100-24Q Switch
20
18
22
19 21
23
SN:TA3113280064
Locating the Serial Number ID Labels on FRU Components
The power supplies, fan module, and expansion modules installed in QFX5100 switches are field-replaceable
units (FRUs). For each FRU, you must remove the FRU from the switch chassis to see the FRU serial number
ID label.
•
AC power supply—The serial number ID label is on the top of the AC power supply.
•
Fan module—The serial number ID label is on the top of the fan module.
•
Expansion module–The serial number ID label is in the middle of the printed circuit board (PCB).
RELATED DOCUMENTATION
Returning a QFX5100 Device or Component for Repair or Replacement | 616
Locating the Serial Number on a QFX3600 or QFX3600-I Device or
Component
IN THIS SECTION
Listing the Chassis and Component Details Using the CLI | 594
Locating the Chassis Serial Number ID Label on a QFX3600 or QFX3600-I Device | 595
Locating the Serial Number ID Labels on FRU Components | 595
593

Juniper QFX5110 Series Specifications

General

Rack Units	1U
Operating System	Junos OS
Form Factor	Fixed
Management	CLI, SNMP, NETCONF
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Humidity	5% to 90% non-condensing
AC Power Input	100-240 VAC
Power Supply	Redundant, hot-swappable