Juniper QFX5110 Series - Performing the Initial Configuration; Autoprovisioning a Virtual Chassis Fabric

CHAPTER 27
Performing the Initial Configuration
IN THIS CHAPTER
Autoprovisioning a Virtual Chassis Fabric | 368
Preprovisioning a Virtual Chassis Fabric | 373
Configuring a Nonprovisioned Virtual Chassis Fabric | 380
Autoprovisioning a Virtual Chassis Fabric
Autoprovisioning a Virtual Chassis Fabric (VCF) enables you to “plug and play” devices into your VCF after
minimal initial configuration. See Understanding Virtual Chassis Fabric Components and “Understanding
Virtual Chassis Fabric Configuration” on page 4 for details on the supported devices that can be
interconnected into a non-mixed or mixed VCF.
Before you begin:
368