CHAPTER 4
QFX3600 Overview
IN THIS CHAPTER
QFX3600 Device Overview | 45
Front Panel of a QFX3600 Device | 48
QFX3600 Device Overview
IN THIS SECTION
Software | 46
Hardware | 46
The Juniper Networks QFX3600 device is a high-speed, multipurpose switch especially designed for
next-generation data centers. The QFX3600 device can be configured as:
•
A standalone switch
•
A Node device in a QFX3000-M or QFX3000-G QFabric system
•
An Interconnect device in a QFX3000-M QFabric system
•
A member in a QFX Virtual Chassis
•
A leaf node in a QFX5100 Virtual Chassis Fabric (VCF)
Sixteen 40-Gbps ports in the device use quad small form-factor pluggable plus (QSFP+) transceivers. The
small form-factor and front facing ports in the switch make it suitable for deployment in high-density
server racks and container-based data center deployments.
In a QFX3000-G QFabric system, the QFX3600 device can operate as a Node device through the 40-Gbps
uplinks ports to a Juniper Networks QFX3008-I Interconnect device. On a QFX3000-M QFabric device,
the QFX3600 can be configured to operate as either a Node device or as a QFX3600-I Interconnect device.
When configured as a Node device in a QFX3000-M QFabric system, , the QFX3600 device can connect
45
To Next Page
Loading...
