Juniper QFX5110 Series User Manual

then details of the 4 major alarms and 1 minor alarm are displayed. Major alarms are displayed in red and
minor alarms are displayed in yellow.
In an EX8200 Virtual Chassis, the top 5 alarms for the primary external Routing Engine are displayed by
default. If you select an EX8200 member switch of the Virtual Chassis, the top 5 alarms for that member
switch are displayed.
File System Usage
To display the file system storage details of a switch in the backup or line card role, click the image of that
switch.
For EX4650 switches, the directory, space used, and the file type details are displayed. By default, primary
switch file system storage details are displayed. When you click the image, line card switch file system
storage details are displayed.
Chassis Viewer
Click the Rear View button to see the back of the chassis image. Click the Front View button to see the
front of the chassis image. In a Virtual Chassis configuration, the Rear View button is disabled if the switch
is not selected.
NOTE: For EX4650 switches, chassis viewer supports only the standalone view and does not
support Virtual Chassis configuration.
•
Table 108 on page 549—Describes the chassis viewer for EX2200 switches.
•
Table 109 on page 549—Describes the chassis viewer for EX2200-C switches.
•
Table 110 on page 550—Describes the chassis viewer for EX3200, EX3300, and EX4200 switches.
•
Table 111 on page 552—Describes the chassis viewer for EX4300 switches.
•
Table 112 on page 553—Describes the chassis viewer for EX4500 switches.
•
Table 113 on page 555—Describes the chassis viewer for EX4550 switches.
•
Table 114 on page 556—Describes the chassis viewer for EX4600 switches.
•
Table 115 on page 557—Describes the chassis viewer for EX4650 switches.
•
Table 116 on page 558—Describes the chassis viewer for EX6210 switches.
•
Table 117 on page 559—Describes the chassis viewer for EX8208 switches.
•
Table 118 on page 561—Describes the chassis viewer for EX8216 switches.
•
Table 119 on page 562—Describes the chassis viewer for the XRE200 External Routing Engines.
548

Juniper QFX5110 Series Specifications

General

Rack Units	1U
Operating System	Junos OS
Form Factor	Fixed
Management	CLI, SNMP, NETCONF
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Humidity	5% to 90% non-condensing
AC Power Input	100-240 VAC
Power Supply	Redundant, hot-swappable