Juniper QFX5110 Series User Manual

Table 17: QFX5110 Environmental Tolerances
ToleranceDescription
No performance degradation to 6562 feet (2000 meters)Altitude
Normal operation ensured in relative humidity range of 5% through 90%,
noncondensing
•
Short-term operation ensured in relative humidity range of 5% through
93%, noncondensing
NOTE: As defined in NEBS GR-63-CORE, Issue 3, short-term events can
be up to 96 hours in duration but not more than 15 days per year.
Relative humidity
•
Normal operation ensured in temperature range of 32° F through 104° F
(0° C through 40° C)
•
Nonoperating storage temperature in shipping container: –40° F through
158° F (–40° C through 70° C)
Temperature
Designed to comply with Zone 4 earthquake requirements per NEBS
GR-63-CORE, Issue 3.
Seismic
NOTE: Install QFX Series devices only in restricted areas, such as dedicated equipment rooms
and equipment closets, in accordance with Articles 110-16, 110-17, and 110-18 of the National
Electrical Code, ANSI/NFPA 70.
RELATED DOCUMENTATION
QFX5110 Clearance Requirements for Airflow and Hardware Maintenance | 121
Standalone Installation Overview | 262
Environmental Requirements and Specifications for a QFX5100 Device
The switch must be installed in a rack or cabinet. It must be housed in a dry, clean, well-ventilated, and
temperature-controlled environment.
99

Juniper QFX5110 Series Specifications

General

Rack Units	1U
Operating System	Junos OS
Form Factor	Fixed
Management	CLI, SNMP, NETCONF
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Humidity	5% to 90% non-condensing
AC Power Input	100-240 VAC
Power Supply	Redundant, hot-swappable