Name: Juniper QFX5110 Series
Brand: Juniper
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Management Port LEDs in the QFX3600 and QFX3600-I Device

The RJ-45 management ports labeled C0 and C1 and SFP management ports labeled C0S and C1S in a

QFX3600 or QFX3600-I device have two LEDs that indicate link speed and activity.

NOTE: On the SFP management ports, LA denotes activity, and ST denotes speed.

Figure 192: LEDs on the Management Ports on a QFX3600 or QFX3600-I Device

g050208

Activity

LED

Link speed

LED

Table 90 on page 520 describes the management port LEDs.

Table 90: Management Port LEDs in a QFX3600 or QFX3600-I Device

DescriptionStateColorLED

The port is not active.OffUnlitLink speed

1-Gbps link is established.On steadilyGreen

10/100-Mbps link is established.

NOTE: The SFP management ports (C0S and C1S) do

not support 10-Mbps or 100-Mbps speeds.

On steadilyAmber

There is no activity on the link.OffUnlitActivity

There is activity on the link.FlickeringGreen

520

Questions and Answers:

Need help?

Do you have a question about the Juniper QFX5110 Series and is the answer not in the manual?

Juniper QFX5110 Series Specifications

General