Juniper QFX5110 Series User Manual

CHAPTER 8
Rack and Cabinet Requirements
IN THIS CHAPTER
QFX5110 Rack Requirements | 109
Rack Requirements for a QFX5100 Device | 111
Rack Requirements for a QFX3600 or QFX3600-I Device | 112
Rack Requirements for a QFX3500 Device | 114
Rack Requirements | 115
Cabinet Requirements for a QFX5100 Device | 117
Cabinet Requirements for a QFX3600 or QFX3600-I Device | 118
Cabinet Requirements for a QFX3500 Device | 119
Cabinet Requirements | 120
QFX5110 Clearance Requirements for Airflow and Hardware Maintenance | 121
Clearance Requirements for Airflow and Hardware Maintenance for a QFX5100 Device | 122
Clearance Requirements for Airflow and Hardware Maintenance for a QFX3600 or QFX3600-I Device | 123
Clearance Requirements for Airflow and Hardware Maintenance for a QFX3500 Device | 125
Clearance Requirements for Airflow and Hardware Maintenance for EX4300 Switches | 126
QFX5110 Rack Requirements
QFX5110 switches are designed to be installed on four-post racks.
Rack requirements consist of:
•
Rack type
•
Mounting bracket hole spacing
•
Rack size and strength
Table 22 on page 110 provides the rack requirements and specifications for the QFX5110.
109

Juniper QFX5110 Series Specifications

General

Rack Units	1U
Operating System	Junos OS
Form Factor	Fixed
Management	CLI, SNMP, NETCONF
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Humidity	5% to 90% non-condensing
AC Power Input	100-240 VAC
Power Supply	Redundant, hot-swappable