RELATED DOCUMENTATION
Network Configuration Example: MetaF abric™ Architecture 1.1: Configuring Virtual Chassis Fabric
and Network Director 1.6
Autoprovisioning a Virtual Chassis Fabric | 368
Preprovisioning a Virtual Chassis Fabric | 373
Configuring a Nonprovisioned Virtual Chassis Fabric | 380
Virtual Chassis Fabric Hardware Overview
The Juniper Networks Virtual Chassis Fabric (VCF) spine-and-leaf architecture supports two types of
hardware configurations based on the switch model used as the spine in the VCF.
•
QFX5110 VCF
•
QFX5110-32Q (spine or leaf)
•
QFX5110-48S (leaf)
•
QFX5100-24Q (leaf)
•
QFX5100-48S (leaf)
•
QFX5100-48T (leaf)
NOTE: Available on Junos OS Release 17.3R2 and later.
•
QFX5100-96S (leaf)
•
QFX5100 VCF
•
QFX5100-24Q (spine or leaf)
•
QFX5100-48S (spine or leaf)
•
QFX5100-48T (leaf)
•
QFX5100-96S (leaf)
•
QFX3600 (leaf)
•
QFX3500 (leaf)
•
EX4300 (leaf)
Homogeneous configurations are Installations with all members within the same line of switches (for
example, QFX5100-24Q, QFX5100-48S, QFX5100-48T, and QFX5100-96S in a QFX5100 VCF). QFX5100
8
To Next Page
Loading...
