Juniper QFX5110 Series User Manual

Table 82: Management Port LEDs on a QFX5100 Switch
DescriptionStateColorLED
No link is established, there is a fault, or the link is
down.
OffUnlitLink/Activity
A link is established, but there is no link activity.On steadilyGreen
A link is established, and there is link activity.Blinking or flickering
Either the port speed is 10 M or the link is down.OffUnlitStatus
The port speed is 1000 M.On steadilyGreen
The port speed is 100 M.On steadilyAmber
RELATED DOCUMENTATION
Connecting a QFX5100 Device to a Network for Out-of-Band Management | 296
Access Port and Uplink Port LEDs on a QFX5100 Device
The Link/Activity and Status LED configuration for QFX5100 switches use bi-colored LEDs. The link LED
indicates link activity or a fault. The status LED indicates transceiver presence. See Table 83 on page 511
to locate the position and type of LED for your QFX5100 model.
510

Juniper QFX5110 Series Specifications

General

Rack Units	1U
Operating System	Junos OS
Form Factor	Fixed
Management	CLI, SNMP, NETCONF
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Humidity	5% to 90% non-condensing
AC Power Input	100-240 VAC
Power Supply	Redundant, hot-swappable