EasyManuals Logo

Juniper QFX5110 Series User Manual

Juniper QFX5110 Series
669 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #126 background imageLoading...
Page #126 background image
NOTE: Install QFX Series devices only in restricted areas, such as dedicated equipment rooms
and equipment closets, in accordance with Articles 110-16, 110-17, and 110-18 of the National
Electrical Code, ANSI/NFPA 70.
RELATED DOCUMENTATION
Clearance Requirements for Airflow and Hardware Maintenance for a QFX3600 or QFX3600-I
Device | 123
Installing and Connecting a QFX3600 or QFX3600-I Device | 298
Environmental Requirements and Specifications for a QFX3500 Device
The device must be installed in a rack or cabinet housed in a dry, clean, well-ventilated, and
temperature-controlled environment.
Follow these environmental guidelines:
The site must be as dust-free as possible, because dust can clog air intake vents and filters, reducing the
efficiency of the device cooling system.
Maintain ambient airflow for normal device operation. If the airflow is blocked or restricted, or if the
intake air is too warm, the device might overheat, leading to the device temperature monitor shutting
down the device to protect the hardware components.
Table 20 on page 102 provides the required environmental conditions for normal device operation.
Table 20: QFX3500 Device Environmental Tolerances
ToleranceDescription
No performance degradation to 10,000 feet (3048 meters)Altitude
Normal operation ensured in relative humidity range of 5% through 85%, noncondensingRelative humidity
102

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper QFX5110 Series and is the answer not in the manual?

Juniper QFX5110 Series Specifications

General IconGeneral
Rack Units1U
Operating SystemJunos OS
Form FactorFixed
ManagementCLI, SNMP, NETCONF
Operating Temperature32°F to 104°F (0°C to 40°C)
Storage Temperature-40°F to 158°F (-40°C to 70°C)
Humidity5% to 90% non-condensing
AC Power Input100-240 VAC
Power SupplyRedundant, hot-swappable

Related product manuals