Juniper QFX5110 Series User Manual

CHAPTER 16
Compliance
IN THIS CHAPTER
Agency Approvals for EX Series Switches | 190
Agency Approvals for the QFX Series | 191
Compliance Statements for EMC Requirements for EX Series Switches | 192
Compliance Statements for EMC Requirements for the QFX Series | 197
Compliance Statements for Acoustic Noise for EX Series Switches | 200
Agency Approvals for EX Series Switches
This topic applies to hardware devices in the EX Series product family, which includes EX Series switches,
the EX Series Redundant Power System (RPS), and the XRE200 External Routing Engine.
These hardware devices comply with the following standards:
•
Safety
•
CAN/CSA-C22.2 No. 60950-1 Information Technology Equipment
•
UL 60950-1 Information Technology Equipment
•
EN 60950-1 Information Technology Equipment
•
IEC 60950-1 Information Technology Equipment
•
EN 60825-1 Safety of Laser Products - Part 1: Equipment classification and requirements
•
EMC
•
FCC 47CFR Part 15 Class A (USA)
•
EN 55022 Class A Emissions (Europe)
•
ICES-003 Class A
•
VCCI Class A (Japan)
•
AS/NZS CISPR 22 Class A (Australia/New Zealand)
•
CISPR 22 Class A
190

Juniper QFX5110 Series Specifications

General

Rack Units	1U
Operating System	Junos OS
Form Factor	Fixed
Management	CLI, SNMP, NETCONF
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Humidity	5% to 90% non-condensing
AC Power Input	100-240 VAC
Power Supply	Redundant, hot-swappable