Table 105: System Information (continued)
DescriptionField
External Routing Engines configured as a Virtual Chassis,
the values displayed in Inventory details are 1–2 XRE
and 0–4 LCC, where LCC refers to the EX8200 line card
chassis.
Indicates the version of the Junos OS image. In a Virtual
Chassis configuration, the Junos OS image of the primary
switch is displayed by default. To display the Junos OS
image of a specific switch, click the image of that switch.
NOTE: For EX4650 switches, the Junos OS image of the
primary is displayed by default. To display the Junos OS
image of a specific switch, click the image of that switch.
Junos image
Indicates the version of the boot image that is used. In a
Virtual Chassis configuration, the boot image of the
primary switch is displayed by default. To display the boot
image of a specific switch, click the image of that switch.
NOTE: For EX4650 switches, the boot image of the
primary switch is displayed by default. To display the boot
image of a specific switch, click the image of that switch.
Boot image
Indicates the time since the last reboot. In a Virtual Chassis
configuration, to display the uptime of the specific switch,
click the image of that switch.
NOTE: For EX4650 switches, click the image of the switch
to display the uptime.
Device uptime
Indicates the time when the switch was last configured.Last configured time
Health Status Panel
Table 106: Health Status
DescriptionField
EX2200, EX2200-C, EX3200, EX3300, EX4200, and EX4300 Switches
543