Interactive SourceMeter® Instrument Reference Manual Section 3:
2450-901-01 Rev. B/September 2013 3-19
Figure 71: Example of spreadsheet with reading buffer content Sheet 2
The following table describes the information that is stored in each column of the spreadsheet.
An F in the column indicates the corresponding heading item is false for that reading. For example, if
an F is listed in the Math column, the F indicates that the item was not used or did not occur on that
reading.
A T in the column indicates that the corresponding heading item is true for that reading. For example,
if a T is listed in the Math column, the T indicates that the item was applied to that reading.