Keithley 2450

Model 2450
Interactive SourceMeter® Instrument Reference Manual Section 3:
Functions and features
2450-901-01 Rev. B/September 2013 3-37
Math mx+b m factor
MENU > Measure > Filter/Math >
m (Scalar)
smu.measure.math.mxb.mfactor
(on page 8-114)
:CALCulate[1]:<function>:MATH:MBFactor (on
page 6-8)
Math percent
MENU > Measure > Filter/Math >
Percent
smu.measure.math.percent (on
page 8-115)
:CALCulate[1]:<function>:MATH:PERCent (on
page 6-11)
Units
Not available from front panel
smu.measure.unit (on page 8-
125)
[:SENSe[1]]:<function>:UNIT (on page 6-59)
Limit 1 and Limit 2
MENU > Measure > Settings > Limits
> State
smu.measure.limit[Y].enable (on
page 8-106)
:CALCulate2:<function>:LIMit<y>:STATe
(on
page 6-17)
Limit auto clear
MENU > Measure > Settings > Limits
> Auto Clear
smu.measure.limit[Y].autoclear
(on page 8-104)
:CALCulate2:<function>:LIMit<Y>:CLEar:AUTO
(on page 6-13)
Limit low value
MENU > Measure > Settings > Limits
> Low Value
smu.measure.limit[Y].low.value
(on page 8-110)
:CALCulate2:<function>:LIMit<y>:LOWer[:DATA]
(on page 6-16)
Limit high value
MENU > Measure > Settings > Limits
> High Value
smu.measure.limit[Y].high.value
(on page 8-109)
:CALCulate2:<function>:LIMit<y>:UPPer[:DATA]
(on page 6-18)
Limit fail
Displayed on home screen
smu.measure.limit[Y].fail (on page
8-107)
:CALCulate2:<function>:LIMit<y>:FAIL? (on
page 6-15)
User delay (1 through 5)
Not available from front panel
smu.measure.userdelay[N] (on
page 8-126)
[:SENSe[1]]:<function>:DELay:USER<n> (on
page 6-47)
Performance
QUICKSET > Performance
smu.measure.performance
Not available from SCPI