Keithley 2450

Model 2450
Interactive SourceMeter® Instrument Reference Manual Section 4: Source-
measure considerations
2450-901-01 Rev. B/September 2013 4-25
Digital I/O reset values
Setting Default value on
reset
Not available from front panel
:DIGital:LINE<n>:MODE (on page 6-19
)
digio.line[N].mode (on page 8-43)
Digital line, input
Display reset values
Setting Default value on
reset
SETTINGS swipe screen > Display Digits
:DISPlay:<function>:DIGits (on page 6-23)
smu.measure.displaydigits (on page 8-100)
5½
Format reset values
Setting Default value on
reset
Not available from front panel
:FORMat:BORDer (on page 6-29)
format.byteorder (on page 8-63)
Swapped
Little endian
Not available from front panel
:FORMat[:DATA] (on page 6-30
)
format.data (on page 8-64)
ASCII
Not available from front panel
:FORMat:ASCii:PRECision (on page 6-28)
format.asciiprecision (on page 8-62)
Automatic
Localnode reset values
Setting Default value on
reset
Not available from front panel
Not applicable for SCPI
localnode.prompts (on page 8-71)
Disabled
Not available from front panel
Not applicable for SCPI
localnode.showevents (on page 8-73)
0
Output reset values
Setting Default value on
reset
MENU > Source > Settings > Output Off Mode
:OUTPut[1]:<function>:SMODe (on page 6-31)
smu.source.offmode (on page 8-139)
Normal
OUTPUT ON/OFF switch
:OUTPut[1][:STATe] (on page 6-34)
smu.source.output (on page 8-140)
Off