Keithley 2450

Model 2450
Interactive SourceMeter® Instrument Reference Manual Section 4: Source-
measure considerations
2450-901-01 Rev. B/September 2013 4-29
Setting Default value on
reset
Not available from front panel
:TRIGger:TIMer<n>:STARt:GENerate (on page 6-170)
trigger.timer[N].start.generate (on page 8-221)
Off
Not available from front panel
:TRIGger:TIMer<n>:STARt:SEConds (on page 6-171)
trigger.timer[N].start.seconds (on page 8-222)
0
Not available from front panel
:TRIGger:TIMer<n>:STARt:STIMulus (on page 6-171)
trigger.timer[N].start.stimulus (on page 8-223)
No event
Not available from front panel
:TRIGger:TIMer<n>:STATe (on page 6-173
)
trigger.timer[N].enable (on page 8-219)
Off
Not available from front panel
Not applicable for SCPI
trigger.tsplinkin[N].edge (on page 8-225)
Falling
Not available from front panel
Not applicable for SCPI
trigger.tsplinkout[N].logic (on page 8-228)
Positive
Not available from front panel
Not applicable for SCPI
trigger.tsplinkout[N].pulsewidth (on page 8-228)
10e-6
TSP-Link and TSP-Net reset values
Setting Default value on
reset
Not available from front panel
Not applicable for SCPI
tsplink.line[N].mode (on page 8-232)
Digital open drain
Not available from front panel
Not applicable for SCPI
tspnet.timeout (on page 8-244)
20
Not available from front panel
Not applicable for SCPI
tspnet.tsp.abortonconnect (on page 8-245)
1