Features of the Konica 7255/7272 (continued)
xiii
•Stamp
Inprints a stamp, watermark, or scanned image onto the copy image.
•Staple
Selects the stapling position and number of staples.
• STD Size (Special)
Detects the standard paper sizes which cannot normally be detected when
loaded in a main body tray or Multi-sheet bypass tray.
•Tab Paper
Copies onto tabbed sheets from tabbed originals, allowing the image on the
tab part of the original to be printed on the same part of the tabbed copy
paper.
• Tandem Mode for Two Copiers
Works in tandem to distribute a large copying job in half the time of non-tan-
dem mode.
• Text/Photo Enhance
Enhances photo image in Photo mode, regular image in Auto mode, text
image in Text mode, lighter image in Increase Contrast mode.
• Userset Density (USERSET 1, USERSET 2)
Outputs up to 16 density samples on a total of 4 pages that display 4
samples per page, then programs the desired density under USERSET 1
and/or USERSET 2.
• Weekly Timer
Can be set according to the needs of each work environment. Turns main
body power Off/On daily or weekly, during lunch time, on holidays, and also
enables the Timer Interrupt mode, which allows temporary use of the
machine even when the machine is in the daily, weekly, or holiday Off mode.
• Wide Size Paper
Copies onto paper slightly larger than the specified regular size.
• Z-Folded Original
This feature sets the RADF to accept Z-folded originals.
To Next Page
Loading...
