Features of the Konica 7255/7272 (continued)
xii
•Proof Copy
To ensure correct output before running multiple copies, run a proof copy by
pressing [PROOF COPY] on the control panel or touching PROOF COPY on
the Check Screen.
• Punch Mode for FS-110/210 Finisher with PK-110/120/120 Type-A Punch-
ing Kit Installed:
Punches four holes in output copies.
PK-120 Type-A Punching kit punches four holes of the Swedish type.
•
Punch/Z-Fold Mode for FS-110/111/210 Finisher with PZ-108 Punching/Z-
Folding Unit Installed:
Punches four holes in output copies and Z-fold copied sheets.
•
Punch/Z-Fold Mode for FS-110/111/210 Finisher with PZ-109 Punching/Z-
Folding Unit Installed:
Punches two or four holes in output copies and Z-fold copied sheets.
• Repeat
Selects the horizontal image area across the page, and repeats it down the
page as many times as the repeat width setting (10 ~ 150mm) permits in
manual or auto.
• Reserve
Scans in subsequent copy jobs while the 7255/7272 is busy printing or
copying.
• Reverse Image
Reverses the image from black-on-white to white-on-black or vice versa.
•Rotation
Rotates the image before copying when the portrait/landscape orientation of
the original is different from the orientation of the copy paper.
• Rotation Exit (Rotation Sort / Rotation Group)
When no Finisher is installed, Rotation exit alternately switches the horizon-
tal and vertical orientation of each sorted set as it outputs to the exit tray. Be
sure to load both A4 and A4R in separate trays (including the Multi-sheet
bypass tray) before selecting this feature.
• Server Function (option)
Stores image data in the HDD for future printing (or transmits the data to a
PC over a network for editing and printing).
• Sheet/Cover Insertion
Inserts up to 30 blank or copied sheets from any tray including the Multi-
sheet bypass tray, or inserts blank or copied front and back covers from any
tray including the Multi-sheet bypass tray.
To Next Page
Loading...
