Punching File Holes in Copies (Punch) (continued)
7-15
8. Select additional copying features, as required.
9. Enter the desired print quantity from the control panel keypad.
HINT
See p. 3-6 for details on setting print quantity.
10. Position originals in the document feeder.
HINT
See p. 3-2 to p. 3-4 for details on positioning originals.
11. Press [START].
CAUTION
When the finisher exit tray capacity is exceeded due to the print
quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.
Advanced
Information
Using Finisher
Manually
Cover Sheet
Feeding
Three-Fold
Z-Fold
Tandem Mode
Punch
Fold /
Stitch&Fold
Vertical/Hori-
zontal Zoom
Rotation
Weekly
Timer
To Next Page
Loading...
