Printing Stamp, Page, Date/Time onto Copies (Stamp) (continued)
9-55
When selecting DATE/TIME: Specify the date/time type, printing
position, character size and printed page.
Touch to highlight the desired date, time, and printing position keys on the
screen. If fine adjustment is required, touch FINE ADJ. OF POSITION to dis-
play the Fine Adjustment Setting Screen. See p. 9-56 for details.
Touch CHARACTER SIZE/TYPE to select the character size (8 pt, 10 pt, 12
pt or 14 pt) and type (GOTHIC or MING). See p. 9-57 for details.
Touch PRINTED PAGE to designate whether to print the selected stamp on
the cover only or on all pages.
5. Touch OK.
The Stamp/Overlay Selection Screen will be restored.
Touch to select another stamp function key to use in combination, if desired.
6. Touch OK on the Stamp/Overlay Selection Screen.
The Application Selection Screen will be restored.
7. Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
8. Enter the desired print quantity from the control panel keypad.
HINT
See p. 3-6 for details on setting print quantity.
9. Position original(s) FACE UP in the document feeder or FACE
DOWN on the platen glass.
HINT
For details on positioning originals, see p. 3-2 to p. 3-5.
10. Press [START].
Applications
Reverse
Image
Non-Image
Area Erase
Program Job
Dual Page
Image Insert
OHP
Interleave
Booklet
Combination
Chapter
Sheet/Cover
Insertion
Application
Selection Screen
Repeat
Frame/Fold
Erasure
AUTO
Layout
Full-Image
Area
Image Shift
Reduce &
Shift
Stamp
Overlay
Overlay
Memory
To Next Page