Positioning Originals (continued)
3-4
Positioning originals in Z-Folded original mode
Z-Folded original mode detects the folded original size without using the size
detection sensor of the RADF.
HINT
To use the Z-Folded original mode, see procedure on p. 8-10 to p. 8-11.
1. Arrange originals in order.
2. Position original(s) FACE UP in the document feeder tray.
Place two-sided originals with page one FACE UP.
Up to 100 originals can be set at a time.
Please Be Reminded!
• Before placing originals in the tray, be sure the document feeder is
closed fully. Once closed, do not open the document feeder, other-
wise the selected copy conditions may be altered automatically.
• Be sure not to use unsuitable RADF originals. See p. 11-8 for details.
3. Adjust paper guides.
To Next Page
Loading...
