56
Style Record mode
Style Tracks page
Metro (Metronome)
Thisisthemetronomeheardduringrecording.
Off Nometronomeclickwillbeheard during
recording. A one‐bar prec
ount will be
playedbeforestartingrecording.
On1 Metronome on, with a one‐bar precount
beforestartingre
cording.
On2 Metronome on, with a two‐bar precount
beforestartingrecording.
Resol (Resolution)
Thisparametersetsthequantizationduringrecording.
(1/32)…(1/8)
Grid resolution, in music
al valu
es. For
example, when you select 1/16, all notes
are moved to the nearest 1/16 division.
When you select 1/8, all notes are moved
tothenearest1/8division.
Meter
Thisisthemeter(timesignature)oftheStyle.Youcan
edit this parameter only when the Style is empty, i.e.
beforeyoubeginrecordinganything.
Original Key/Chord
This is the track’s original key and chord. Use the D
VOLUME/VALUEbuttonstoselecttheline,andtheF‐
1 and F‐2 buttons to switch from the key/chord name
andthekey/chordtype(Maj,min…).
WheninStylePlaymode,thischordwillbeplayedback
exactlyasitwasrecorded,withoutanyNTTprocessing
(see below). To record just one Chord Variation for a
Style Element, the suggested original key/chord is
“maj7”.Beverycarefultoplaythe7th+note(i.e.,witha
“Cmaj7th”key/chord,theB)
,toavoidthelackofnotes,
ora
badNTTconversionwhenplayingdifferentchords.
Note: To conform to Korg specifications, it is advisable to
recordboththe“Major”and “minor” ChordVariations for
theIntro1andEnding1StyleElements.
When you select a track, the original key/chord
assigned to the selected track will be activated. All
recorded tracks will play back on that key/chord. For
example,if theoriginal key/chordfortheAcc1trackis
A7th, whenselectingtheAcc1tracks alltheremaining
trackswillplayaccordingtotheA7
thkey/chord.
Intheaboveexample,youw
illrecordtheAcc1tra
ckin
the AMajor key, with notes that will comply with the
A7th chord. This is the pattern that will be recalled
exactlyasitwasrecorded,whenplayinganA7thchord.
CopyingtheKey/Chordvaluetoallothertracksofthe
sameChordVar i a t i o n .
Whileinthispage,youcankeep
theSHIFTbuttonpressed,whilepressingoneofthe[D]
VOLUME/VALUEbuttons,to copytheKey ofthecur‐
rently selected track to al
l other tracks of the same
ChordVariat
ion.Thisfunctionisusefultospeed‐uppat‐
ternprogramming,andtoavoi
dhavingdifferenttracks
indifferentkeyswithinthesameChordVariation.
NTT
The Note Transposition Table (NTT) determines how
the arranger will transpose pattern notes, when play‐
ingachordthatdoesnotexactlymatchtotheoriginal
chord of a Chord Va
riation. For example, if you only
recordedaChordVariationfortheCMajchord,whena
CMaj7 is recognized on the keyboard the arranger
musttransposesomenotestocreatethemissing7th.
Note:ToconformtoKorgspecificat
ions,itisadvisabletoset
theNTTto“NoTranspose”ontheIntro1andEnding1.
Root Therootnote(in CMaj=C)is transposed
tothemissingnote
s.
5th The5thnote(inCMaj=G)istransp
osedto
themissingnotes.
i‐Series Alloriginalpatternsmustbeprogrammed
on the “Maj7” or
“min7” chords. When
loadingoldKorgi‐Seriesinstruments,this
optionisautomaticall yselected.
NoTransp Notranspositionapplied.Thepa
tternwill
always play as recorded.Thisis the stan‐
dard setting of Intro 1 and Ending 1 in
Korg’sorig
inalStyles.
STYLE TRACKS PAGE
While in the main Style Record page, press TRACK
SELECT to jump to this page. Here you can see and
selectanyStyletrack.
As recorded with
NTT = Root or 5th
(Key/Chord = CMaj)
When you play a CM7
with NTT = Root
When you play a CM7
with NTT = 5th
As recorded with
NTT = i-Series
(Key/Chord = CM7)
When you play a CMaj
with NTT = i-Series
When you play a CM7
with NTT = i-Series
Style in record/edit
Style Element-Chord Variation in
record/edit
Style tracks
To Next Page
Loading...
Need help?
General
