57
Style Record mode
Step Record page
Program name
Select a track using the VOLUME/VALUE buttons.
Select a Program using the PROGRAM/PERFOR‐
MANCEsection.
Whileinthispage,youcansetthetra
ck’svolumeusing
the VOLUME/VALUE buttons. Since the track’s vol‐
umeismemorizedintheStylePe
rformanceandnot in
thepattern,thissettingwillnotberecordedandsaved.
However, this will allow you to play back louder any
referencetrack,orthetrackyouarerecording.
Track status
WhenintheStyleTrackspage,ea chtrackcanbeinone
ofthreestatus.
Play (Visiblestatusicon).Thisstatusisavailabl
e
onlyfornon‐selectedtracks.Wheninplay,
atrack canplaybacktherecordedpattern.
Mute (Hidden status icon). When in this status
,
you can play the track on the keyboard,
butyoucan’trecordonit.Thisisusefulto
do some preliminary test, before actually
startrecording.
To set a track in mute, first select it,then
press both corresponding VOLUM
E/
VALUEbuttonstohidethestatusicon.To
set the track in record again, press again
thecorrespondingVOLUME/VALUEbut‐
tons.
Record (F
lashing status icon). When in this status
,
the track is ready to record. Just select a
tracktosetitinrecordstatus.
STEP RECORD PAGE
Access this page from the Main page of the Style
Record mode, by selecting the “Stp” recording mode
(“R”parameter),andpressingSTART/ST OP.
(a) section
Previously inserted event. You may delete this event,
andsetitineditagain,bypressingthe<button.
(b) section
Event to be inserted.Seethefollowing parametersfor
informationoneachelementofthissection.
M (Measure)
Thisisthepositionoftheev ent(note,restorchord)to
beinserted.
Meter
Meterofthecurrentmeasure. Thisparametercan’t be
edited. You can set the Meter in the Main page of the
Style Record mode, before actually starting recording
(seestep6onpage58formoreinformation).
key?
This is a prompt, asking for a note or chord to be
played on the keyboard, to enter an eventon the cur‐
rentstep.
Step value
Length of the event to be inserted. Use the NOTE
VALUE buttons, on the lower left area of the control
panel,tochangethi svalue.
… Notevalue.
Dot(.) Augmentsthesele
ctednotebyonehalfof
itsvalue.
Triplet(3) Makestheselectednoteatripl
etnote.
V (Velocity)
Setthisparameterbefore enteringanoteorchord.This
willbetheplayingstrength (i.e.,velocityvalue)ofthe
eventtobeinserted.
KBD Keyboard. You can select this parameter,
by turnin
g all counter‐clockwise the dial.
When this option is selected, the playing
strength of the played note is recognized
andrecorded.
1…127 Velocity value. The eve
nt willbe inserted
with this velocity value, and the actual
playingstrengthofthenoteplayedonthe
keyboardwillbeignored.
D (Duration)
Relative duration of the inserted note. The percentage
isalwaysreferredtothestepvalue.
50% Staccato.
85% Ordinaryarticulation.
100% L
egato.
Buttons used in Step Record mode
TIE button
Tiesthenotetobeinsertedtothepreviousnote.
REST button
Insertsarest.
NOTE VALUE buttons
Selectthestepvalue.
START/STOP button
ExitstheStepRecordmode.
< (Previous step)
Goestothepreviousstep,delet ingtheinsertedstep.
>> (Fast Forward)
Goestothenextmeasure,andfilltheremainingspace
withrests.
(a)
(b)
Previous event
Event to be inserted
Current position
Waiting for a keystroke…
Step value
To Next Page
Loading...
Need help?
General
