Lenze i950

Address Designaon Default seng Seng range
0x5041:011 Gearbox factor
correcon gain 0.1000 0.0000 ... 214748.3647
0x5041:012 Max. gearbox factor correcon 10.0000 0.0000 ... 214748.3647
0x5041:013 Acvate master value correcon 0
0x5042:001 Sensor set posion - (Read only)
0x5042:002 Actual mark posion - (Read only)
0x5042:003 Actual mark error - (Read only)
0x5042:004 Actual limited mark error - (Read only)
0x5042:005 Actual gearbox factor - (Read only)
0x5042:006 Corrected set posion - (Read only)
0x5042:007 Corrected set velocity - (Read only)
0x5042:016 Set posion of selected master value - (Read only)
0x5042:017 Set velocity of selected master value - (Read only)
Conguring the "Sync and Correcon" TA
Mas
ter value correcon (register control)
136